R718F Netvox LoRaWAN Wireless Reed Switch Open/Close Detection SensorR718F Netvox LoRaWAN Wireless Reed Switch Open Close Detection Sensor R718F utilizes a reed switch to detect whether two objects are separated or not. An example of R718Fs application is to detect the state of a door or window for security purposes. It is based on SX1276 wireless communication module, and the communication is fully compatible with LoRaWAN Protocol (Class A). The reed switch is on (conducting) within the magnetic range, and is off (non

an interrupt is triggered

It can be used in a wide variety of ways

and firmware development supported by web and local IDEs

The SGP30 uses a dynamic baseline compensation algorithm and calibration parameters

There are a ton of different ways to read water level

0" 800 x 480 Capacitive UX White 350 154

and depth and motion detection

16-bit PCM)

com | Code for demo example on Libstock | Schematics on documentation page

USR-TCP232-410s Datasheet

• standardized against NIST-certified references

switching up to 30VDC at up to 2 Amps